FMS 850mm FLASH PROP JET ARTF w/o TX/RX/BATT (FMS121P-REF)

FMS 850mm FLASH PROP JET ARTF w/o TX/RX/BATT (FMS121P-REF)

FMS 850mm FLASH PROP JET ARTF w/o TX/RX/BATT (FMS121P-REF)

Brand:FMS
Product Code:FMS121P-REF
Availability:Pre-Order
Date Available:12/08/2019
  • £148.49
  • Ex Tax: £123.74

FMS 850mm FLASH PROP JET ARTF w/o TX/RX/BATT (FMS121P-REF)

For the pursuit of ultimate speed - introducing the FMS Flash!

Designed to minimize drag, the sleek and slender FMS Flash slips through the air like a bullet - reaching whopping speeds of up to 112 miles per hour (180km/h)! The reinforced fuselage and swept wings ensure maximum airframe rigidity even in extreme conditions.

Equipped with a FPV-ready canopy, you can easily install your favorite FPV gear to experience the speed firsthand. A specially designed handle grip and airframe skid under the fuselage ensures perfect hand-launch and belly landings every time.

If you have the need for speed, your search is over! The 850mm FMS Flash is your ultimate speed machine.

Key Features

  • Powerful 3536-1750Kv brushless motor and 60A esc combination
  • Pusher prop configuration
  • 112 mph (180km/h) top speed
  • FPV ready

Needed to Complete

  • 4+ Channel Radio Transmitter and Receiver
  • 4+ Cell 2200mAh 35C LiPo Battery
  • Appropriate Balancing LiPo Charger

What's in the Box?

  • (1) FMS Flash 850mm PNP with:
  • (4) 9g Analog Metal Servos (installed)
  • (1) FMS 60A ESC (installed)
  • (1) FMS 3536-1750Kv Brushless Motor (installed)
  • (1) Product Manual

SPECIFICATION:

  • Aileron: Dual servo control
  • Approx. Flying Speed: 112 mph (180 kph)
  • Approximate Assembly Time: Less than 1 Hour
  • Approximate Flight Time: 3 - 5 minutes
  • CG (Center of Gravity): 3.1 - 3.5" (80 - 90mm) from leading edge of wing measured at fuselage
  • Charger: 4S LiPo compatible charger required
  • Completion Level: Plug-N-Play
  • Elevator: Yes
  • Flaps: No
  • Flying Weight: 31.4oz (890g), approximate
  • Length: 35" (890mm)
  • Material: Foam
  • Minimum Required Radio: 4-channel
  • Minimum Speed Control: 60A included with XT-60 connector
  • Motor Size: 3536-1750Kv
  • Propeller Size: 7x5 pusher configuration
  • Recommended Motor Battery: 14.8V 2200mAh 4S 35C with XT-60 connector
  • Retracts: No
  • Rudder: Yes
  • Servos: Four 9g metal digital
  • Spinner Size: Propeller nut included
  • Transmitter Range: Full range transmitter required
  • Trimscheme Colors: Red and white with yellow accents
  • Wing Area: 186 sq in (12 sq dm)
  • Wing Loading: 0.17 oz sq/in
  • Wingspan: 33.46" (850mm)

Write a review

Note: HTML is not translated!
    Bad           Good