Spektrum DX20 20-CH Transmitter System with AR9020 M2 Selectable 1-4 (SPM20000EU)

Spektrum DX20 20-CH Transmitter System with AR9020 M2 Selectable 1-4 (SPM20000EU)

Spektrum DX20 20-CH Transmitter System with AR9020 M2 Selectable 1-4 (SPM20000EU)

Product Code:SPM20000EU
Availability:In Stock
  • £1,318.99
  • Ex Tax: £1,099.16

From it's premium construction and comfortable ergonomics to it's powerful programming features, the DX20 delivers a pro-class flying experience that is second to none. In fact, it's the only transmitter in it's price range equipped with machined aluminium gimbals.

Multi-Engine Control
The airplane programming includes a multi-engine control option that, when activated, allows you to independently adjust and control up to four engines or motors. You could use it to make individual run-up checks on the ground or sync propeller speeds in flight. It also makes it possible to use asymmetric thrust to tighten the turning radius of large models during ground operations.

Pro-Trim In-Flight Adjustments
When active, ProTrim will allow you to make small dual rate, expo, mix and differential adjustments in flight.

Programmable Voice Alerts
With voice alerts, you can keep tabs on important functions without ever taking your eyes off what you're flying. They can be programmed to call out what flight mode you've chosen or report telemetry information on demand. If an alarm goes off, you won't have to look at the transmitter display to see what's happening. The DX20 will tell you.

Pro-Class Programming for Sailplanes
In addition to extensive airplane and heli programming, the DX20 has the most impressive sailplane programming features you'll find in any handheld transmitter. Ten available flight modes, 5 wing types, 3 tail types, 2 motor types, flap delay with elevator compensation it has it all. You even have the ability to adjust individual servo characteristics (end points, travel, centre, etc.) for all 20 channels.

Built-In Sequencer
Program a sequence of switch-activated events with time delays between each event. For instance, with a flip of the gear switch you could have an auxiliary channel open landing gear doors, then have the retract channel lower the landing gear, followed by the auxiliary channel closing the gear doors after the gear is extended.

Built-In Servo Balancer
No more will you need a complicated network of little boxes littering your fuselage if you want to balance servos. You can precisely balance the output of swashplate servos or multiple servos on a single control surface with the transmitter using a 7-point curve mix.

Wireless Trainer Link
The wireless trainer link gives instructors the option to wirelessly ''buddy box'' with another DSMX transmitter. Once bound to another transmitter, ModelMatch technology will allow the DX20 to re-link without having to go through the bind process again.

250-Model Memory
The enormous capacity of the DX20's on-board memory means you will rarely, if ever, need to juggle models between transmitter memory and your SD card. The model memory menu is easier to navigate too. Only memory slots with model settings saved to them will appear. You won't have to scroll through empty slots or move models around if one is deleted.

Because the DX20 uses the same AirWare software as many other Spektrum transmitters, you can share model setups across platforms with almost any Spektrum pilot.

Stay Up to Date
Register your DX20 and receive alerts whenever Spektrum Airware software updates are available. You also gain access to a growing library pre-set model setups for the most popular Horizon Hobby aircraft.

Programming Features
The DX20 has all the programming functions you need to fly everything from collective pitch helis and multi-rotor aircraft to competition sailplanes and giant-scale jets.

11 Wing Types: 1 Aileron, 2 Aileron, Flaperon, 1 Aileron + 1 Flap, 1 Aileron + 2 Flap, 2 Aileron + 1 Flap, 2 Aileron + 2 Flap, Elevon, Elevon B, 4 Aileron, 6 Aileron
6 Tail Types: Normal, V-Tail A, V-Tail B, 2 Elevator, 2 Rudder, 2 Rudder + 2 Elevator
2 Canard Options with Elevon Wing Types: Canard + 1 Rudder, Canard + 2 Rudder
Independent Multi-Engine Control for Up to 4 Engines or Motors
ProTrim In-Flight Adjustment of Rates, Expo, Mixes and Differential
AS3X Gain Adjustment
Flap Delay and Elevator Compensation
5 Flight Modes
Dual Rates and Expo
0.5% Mix Rate Increments
16 Programmable Mixes

Active Gyro and Governor Trim
7-Point Throttle Curve
7-Point Pitch Curve
7-Point Tail Curve
7 Swash Plate Types: Normal, 3-Servo 120° 3-Servo 135°, 3-Servo 140°, 3-Servo 90°, 4-Servo 90°, 2-Servo 180°
Swash Plate Timing
ProTrim In-Flight Adjustment of Rates, Expo, Mixes and Differential
5 Flight Modes
Dual Rates and Expo
0.5% Mix Rate Increments
16 Programmable Mixes

5 Wing Types: Single Aileron, Dual Aileron, Dual Aileron + Single Flap, Dual Aileron + Dual Flap, Quad Aileron + Dual Flap
3 Tail Types: Normal, V-Tail A, V-Tail B
Motor Throttle Switch Assignment
Aileron and V-tail Differential
Camber System
Camber Preset
ProTrim In-Flight Adjustment of Rates, Expo, Mixes and Differential
AS3X Gain Adjustment
Flap Delay and Elevator Compensation
10 Flight Modes
Dual Rates and Expo
0.5% Mix Rate Increments
16 Programmable Mixes

Multirotor Channel Inputs ALT (Altitude), ROL (Roll), PIT (Pitch), YAW
Multirotor Checklists, Warnings and Voice Alerts
Simplified Multirotor Flight Mode Setup and Switch Assignment

Fly Smarter with Built-In Telemetry.
Built-in telemetry gives you real-time information on things like your model's battery voltage, signal quality, engine or motor temperature, airspeed, altitude and more. You can have the DX20 recite this information on demand using programmable voice alerts. You also have the option of logging telemetry data to the transmitter's SD card for review after the flight.

To use the telemetry function, your model must be equipped with a Spektrum telemetry module and telemetry sensors (all sold separately). You will find there are Spektrum telemetry sensors for tracking just about any model function you can think of, and new ones are being added all the time.

Superior Ergonomics. Made to Fit the Way You Fly.
The weight distribution and ergonomics of the DX20 have been optimised to fit the way you fly. The result is a sense of balance and comfort that perfectly complements the speed and precision of DSMX technology.

Notable features include:
Comfortable side grips
Adjustable stick length and tension
Machined aluminium, quad-bearing gimbals
User-adjustable mode configurations (1, 2, 3 or 4)
User-assigned switch functions
Easy-to-read backlit screen
Intuitive SimpleScroll programming interface
Includes 3 stick end sets short, medium and long

Band: 2.4GHz
Model Memory: 250
Model Types: Airplane, Helicopter , Sailplane and Multirotor
Modes: Selectable 1, 2, 3 or 4
Radio Battery Type: 4000mAh LiPo
Modulation: DSMX®
Number of Channels: 20
Range: Full
Receiver Included: Yes
Telemetry: Yes

AR9020 Receiver
Type: DSM receiver
Channels: 9
Modulation: DSMX
Main Receiver Dimensions: 23x41x20mm (0.91x1.61x0.79 in)
Remote Receiver Dimensions: 20.3x28x6.9mm (0.80x1.10x0.27 in)
Main Receiver Weight: 11.9 g (.42 oz)
Weight with 2 Remote Rx's: 21 g (.76 oz)
Voltage Range: 3.5 to 9.6V
Resolution: 2048
Frame Rate: 11ms when paired with the DX7s, DX7se, DX8 or DX10t
Compatibility: All DSMX aircraft transmitters and module systems

Write a review

Note: HTML is not translated!
    Bad           Good