JAMARA (ZTW) CRS BEAST 80A 4S BRUSHLESS COMBO (082101)

JAMARA (ZTW) CRS BEAST 80A 4S BRUSHLESS COMBO (082101)

JAMARA (ZTW) CRS BEAST 80A 4S BRUSHLESS COMBO (082101)

Brand:ZTW Electronics
Product Code:082101
Availability:In Stock
  • £119.99
  • Ex Tax: £99.99

JAMARA (ZTW) CRS BEAST 80A 4S BRUSHLESS COMBO (082101)

The Jamara CRS Beast combo manufactured by renowned brand ZTW Electronics brings you 1/8 sized power at an economical price point. Ideal to replace non-funtioning esc/motor setups on RTR vehicles.

FEATURES:

  • Suitable for 1/8 buggy/truggy or 1/10 short course
  • Adjustable BEC output: Built-in 6V/5A - 8.4V/5A adjustable BEC.
  • Copper Heat Sink: Mature copper heat conduction technology with aerodynamic layout, combined to provide highly efficient esc cooling.
  • High Output: The esc utilises military grade electronic components to provide stable and sustained power output.
  • Over temperature protection: Automatically reduces output power while the temperature reaches more than 110 degrees. Power will recover when the esc return to a temperature below 100 degrees.
  • Safe start: The ESC itself won't start-up the motor if the throttle is in a raised position on initialisation. To avoid accidental throttle input.

Technical data controller:

  • Max. Current: 80 A
  • Burst Current: 570 A
  • Internal Resistance: 0,0007 Ohm
  • For Use With: Cars or Trucks scale 1:10 + 1:8
  • Battery packs: 2-4 LiPo cells
  • BEC Voltage: 6,0 V
  • BEC Current: 3 A
  • Motor Type: Sensorless Brushless motors
  • Protective Circuits: Temperature  cut-off, Low voltage cut-off and input signal
  • Size: 52 x 38 x 36 mm       (with fan)
  • Weight: 107 g (without cable)
  • Programmable: 10 Programming steps  (Break, Low Voltage, Start Mode etc.)

Technical data motor:

  • No. of cells         2 - 4 LiPo
  • Length                ~ 60 mm
  • Weight                ~ 242 g
  • Rev./V                2150 KV
  • Ø                                 ~ 35 mm
  • Output power      1500 Watt
  • Windings            5
  • Shaft Ø               ~ 5 mm
  • Bolt circle Ø                    ~ 25 mm

All information are provided for informational purposes only from Jamara Modeltecnik.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: ztw, beast, speed controller, esc, motor, brushless motor, brushless esc